Nevada Fire Alarm Technician (F-Card) Practice Exam

These questions are part of the practice quiz. Start practicing

• Trouble signals and their restoration to normal shall be indicated within how many seconds?
• When determining the location for visible notification appliances in a room that is not square, what is common practice?
• What is the maximum distance a heat detector can be from any point on a smooth ceiling?
• What is the color code for heat detectors when the ceiling's maximum temperature rating is 305°F?
• Testing of all circuits extending from central station must be completed at least once every how many hours?
• Which statement about NFPA 72 monitoring in buildings with both a sprinkler system and a fire alarm system is true?
• What type of fire alarm system requires the FA contractor to attach a label documenting the type of service to the FACP?
• How often should the digital alarm communicator transmitter (DACT) be tested in accordance with the manufacturer's published instructions for correct operation?
• A coded alarm consists of not less than three complete rounds of the number transmitted. Each round will consist of not less than __________ impulses.
• Which NFPA 72 reference number is associated with supervisory signals sub coded in the provided materials?
• Where is the correct location to mount a heat detector on a beam ceiling when the beams are less than 12 inches in depth and less than 96 inches on center?
• Access to the proprietary station should be restricted to those directly concerned with the implementation and the ______ of emergency action and procedure.
• Which entity is most commonly recognized as the authority having jurisdiction in construction and code enforcement?
• If primary power is lost on an EVAC system and a FACP is activated by an alarm condition, how long must secondary power be capable of operating the voice evacuation system?
• Which documentation is required for heat detection design in accordance with Section 17.6 of NFPA 72?
• During fire alarm system testing, which systems must be secured from inadvertent actuation for the duration of testing?
• Who is responsible for filling a vacancy in the Nevada State Board of Fire Services?
• Which device category is associated with quarterly testing frequency?
• Which NFPA 72 table provides Time Constant and Response Time Index for detectors?
• Which conditions shall be annunciated by visible means when required by other laws, codes, or standards?
• After acceptance testing, what type of drawings are required to be presented to the building owner?
• In wireless protection system testing, what is the expected result when a fault is introduced in the RF pathway?
• What is the spacing adjustment multiplier used to account for ceiling height in heat detector spacing calculations?
• Who is responsible for filling a vacancy in the Nevada State Board of Fire Services?
• Violating NAC or regulations adopted by the State Fire Marshal is guilty of which offense?
• When remote indicators are required for use with duct smoke detectors, the indicators must be labeled with?
• How long should records be retained for smoke detectors tested over multiple years?
• Which of the following is NOT a classification of carbon monoxide detection equipment and systems?
• What does the acronym RAT stand for in the context of fire alarm transmitters?
• If a heat detector with a listed spacing of 50 feet is mounted on an 18'1" ceiling, what is the maximum allowable spacing?
• What type of signal is received when the system or a portion is placed in bypass or test mode?
• In a household fire alarm system, which statement about smoke detection circuit locking is correct?
• Which of the following is NOT a required purpose of the fire alarm code as defined?
• A sprinkler waterflow device must initiate an alarm signal at the control unit within how many seconds of water flow?
• Which statement best describes pre-alarm signals in relation to other signals?
• If a detector is specifically listed for door frame mounting, what type of detector is it?
• What is the practical purpose of zoning by floor on a building's fire alarm system?
• NFPA 72 is the standard for which type of system?
• The State Board of Fire Services shall consist of at least how many members from Clark & Washoe counties?
• NFPA 72 is commonly known as what?
• Minimum separation for Class A circuit's outbound and return paths in a hallway 9 feet wide?
• Power transfer for supervising station facilities must occur within how many seconds?
• Which factor would most likely cause a reduction in smoke detector spacing?
• What is the primary concern of NFPA 72 regarding carbon monoxide detection?
• Which statement correctly describes the scope of the retention rule for testing records?
• The RAT in fire alarm terminology stands for which of the following?
• Which condition is NOT required to be met in order to utilize speakers from an emergency voice/alarm communications system for a non-fire use?
• During the annual test of the solid electrical connections in the emergency communication system, what should be verified?
• Who is responsible for verifying that all components and functions are installed and operate per the approved plans and sequence of operation?
• What is the purpose of retroactivity in NFPA 72?
• The acronym ANSI represents which organization?
• The acronym ANSI represents:
• What is NFPA 10 the standard for?
• Which organization publishes NFPA standards such as NFPA 13 and NFPA 72?
• In counties not having a population of 100,000 or more, to whom may the State Fire Marshal delegate all or part of the authority or duties?
• Which of the following descriptions would NOT be considered a qualified system designer?
• An FACP must be able to operate its normal functions between which temperatures?
• Which NFPA codebook is the standard for Life Safety Code?
• Beams extending down from the ceiling more than 18 inches and spaced more than 8 feet apart will cause the space between beams to be treated as what for smoke detection spacing?
• What is the requirement for pre-alarm signals?
• When using an SEPSS within a fire alarm system, the UPS must be in compliance with which standard?
• What should be done to all apparatus requiring rewinding or resetting to maintain normal operation following each test and alarm?
• Which standard governs the detector spacing and testing referenced in these questions?
• During a primary power failure, what is the maximum delay allowed for alarm signals?
• What should be included in the documentation cabinet?
• Which conditions must be annunciated by visible means when required by other governing laws, codes, or standards?
• For heat detectors on a 30° slope, spacing of detectors (excluding those at the very peak) is determined by which method?
• In a space with an 84-inch ceiling, the acceptable height for a wall-mounted visual appliance is 78 inches above finished floor. Which choice represents this value?
• Who can provide evidence of qualifications?
• Which statement about Class A circuitry is true?
• How much fuel should be available for testing and emergency use in generators using natural or manufactured gas?
• Which system is required to have standby power capable of operating the system for 24 hours in normal operation?
• The maximum allowable heat detector spacing is determined by multiplying the listed spacing by which factor?
• What are the permitted light pulse durations?
• Recharging batteries must be completed within how long after a single discharge has occurred?
• If a fire alarm system has a malfunctioning circuit that is not corrected at the completion of an inspection, test, or maintenance visit, the ______ must be notified within 24 hours in writing.
• Engine-driven generators used for secondary power for a protected premises fire alarm system must comply with which code article?
• Which drawing is required to be presented to the building owner after acceptance testing?
• What is the minimum mounting height (to the top of the device) for an audible notification appliance?
• Spacing for spot type smoke detectors on a smooth ceiling (in the absence of specific performance based design criteria) can be up to how many feet?
• Which statement about the maximum distance a heat detector can be from any point on a smooth ceiling is correct?
• What action is required after each test and alarm for apparatus that require rewinding or resetting?
• Which NFPA 72 subsection covers testing and maintenance of central station service alarm systems?
• The maximum distance from finished floor to the highest switch or display is 6 ft. What is this distance in meters?
• Which organization publishes NFPA 72, the standard referenced in these questions?
• Which of the following is not permitted for supervising station alarm systems?
• Which detector is recommended for environments with higher temperature, higher air velocity, or humid conditions?
• When remote indicators are required for use with duct smoke detectors, the indicators must be labeled with?
• If the runner is not in attendance at the proprietary supervising station, at what interval should two-way communications be established?
• What type of signal would be generated at the FACP if the fire pump that feeds the sprinkler system is running?
• Which of the following is not a requirement for storage batteries?
• For new fire alarm installations and alterations, which documents are required?
• Which document governs the standard for portable fire extinguishers?
• In a non-square room, what measurement is used to determine the effective intensity from a wall-mounted visual notification appliance?
• What type of system should automatic-starting, engine-driven generators used for secondary power for a supervising station comply with, as per NFPA 72?
• During the annual inspection of a mass notification system's visual appliances, what should be checked?
• NFPA 10 is the standard for what?
• NFPA 72 17.7.3.2 pertains to which aspect of smoke detectors?
• Who is responsible for identifying their name and contact information in system design documents?
• In a fire alarm system that employs automatic detection or water flow devices, which component is required to enable manual alarm initiation?
• What is the minimum duration of an intermittent audible trouble signal?
• Duct detectors are never required on the return air ducts when?
• Manual fire alarm boxes must be located within how many feet of an exit door?
• Who is responsible for providing test plan documentation?
• What documentation is required for heat detection design in accordance with Section 17.6 of the code?
• Who shall be notified when a system or portion thereof is impaired?
• Which temperature level triggers water temperature supervision for cold weather monitoring?
• For automatic drift compensation of detectors, what must the FACP do if the compensation limit is surpassed by the detector?
• Which statement about power transfer times is correct?
• What is the minimum width for access to wall-mounted telephone appliances?
• Fuel storage tanks are not required for an engine-driven generator using gas unless the structure is seismic design category which of the following?
• Which period is specified for retaining testing records after the next test date?
• Which document's scope covers plans and specifications review for public emergency alarm reporting systems?
• Some smoke detectors have a provision for a field adjustment of sensitivity and they are required to have an adjustment range of not less than_______?
• Evidence of qualifications for fire alarm equipment is provided by which party?
• Record Drawings are used to reflect which of the following?
• What is the detector time constant for a detector at 196°F with a listed spacing of 15 ft?
• Which standard must smoke alarms and detectors comply with to operate in normal environmental conditions?
• During initial and re-acceptance testing of wireless protection systems, what must be demonstrated?
• Which document should be provided for all end-of-line and power supervisory devices?
• What are the detector location requirements when used to protect a high rack storage area?
• What is the primary backup energy source for residential fire alarm systems?
• What is the NFPA 72 sublocation code for visible notification appliances?
• Which record category is specifically associated with testing events?
• What is the maximum permissible delay for power supply failure signal transmission in supervising station alarm systems?
• In a non-square room, what measurement is used to determine the effective intensity from a wall-mounted visual notification appliance?
• Where should the visible annunciation means for the location of an operated initiating device be located?
• The reference 29.11.2.1 (3) KEY: smoke alarms sub interconnection of pertains to which fire alarm feature?
• Which detector type uses spacing determined by the average slope height on a sloped ceiling (detectors not located at the peak)?
• Access to wall-mounted telephone appliances must be at least how wide?
• NFPA 72 is the standard for which system?
• Re-acceptance testing is required after which change to the system?
• Spot type heat detector temperature ratings must be at least how many degrees Fahrenheit above the maximum temperature expected at ceiling level?
• What is the purpose of impairment documentation?
• What type of initiating device has a one-time use and is destroyed as a result of its activation?
• Which device in a dry-type system is known to generate a supervisory signal at the Fire Alarm Control Panel?
• Ancillary functions in NFPA 72 are sub functions of which systems?
• Using Ohm's Law, how is voltage calculated?
• Which term describes alarms that are not caused by hazardous conditions and are considered Unwanted?
• When mounting heat detectors on the ceiling they must be located no less than ____ inches from the sidewall?
• Which statement best describes a supervisory signal initiating device?
• When AHJ approves, what is the highest priority sequence for a hold-up alarm?
• What term best describes the documentation that covers testing events?
• A coded supervisory signal must consist of not less than how many rounds of the transmitted number to indicate fault, and how many rounds to notify restoration to normal?
• The Board shall meet at least ______ each year.
• How often should a digital alarm radio receiver (DARR) be tested?
• Fuel storage tanks are not required unless the structure is seismic design category which?
• Which NFPA standard covers the installation of sprinkler systems?
• Which action statement is consistent with re-acceptance testing after changes to a fire alarm system?
• Which of the following is not a required spacing consideration when installing ember detectors?
• Under NFPA 72, when is it permissible to remove sensitive information from record documents?
• The secondary power supply shall automatically provide power to the protected premises fire alarm system within which time frame, whenever the primary power supply fails to provide the minimum voltage required for proper operation?
• Power supplies for fire alarm systems must be installed in accordance with which code?
• The secondary power supply capacity must account for which loads during transfer?
• How many times must the Board meet at minimum each year?
• If you need to install a wall-mounted visual appliance in a protected premises with a ceiling of 84 inches, which height above finished floor is acceptable?
• Visual appliances are required in an area if the average ambient sound level is greater than a level of what?
• Which device provides visible indication of the location of an initiated device to observers?
• Who is allowed to call a Board meeting?
• In buildings that contain a sprinkler system and a fire alarm system, the fire alarm system must monitor which of the following?
• A single open or a single ground fault must be automatically annunciated at the FACP within how many seconds on all monitored conductors?
• Which organization is represented by the acronym ANSI?
• A duct detector must be tested how often?
• A single open or single ground fault must be automatically annunciated at the FACP within how many seconds on all installation conductors that are monitored for integrity?
• After acceptance testing, what type of drawings are required to be presented to the building owner?
• In a remote station fire alarm system, the minimum allowable operating voltage for a notification appliance is down to what percent of its nameplate input voltage?
• Which documentation should be included for all systems, including new systems and additions or alterations?
• Spot type heat detector temperature ratings must be at least how many degrees Fahrenheit above the maximum temperature expected at ceiling level?
• Which NFPA 72 entry defines heat detectors sub location?
• Which type of record is specifically associated with testing events?
• What should be listed on the nameplates of notification appliances?
• How often should supervisory signals generated by initiating devices be tested?
• Which NFPA 72 subsection addresses integrity of installation conductors that are monitored?
• How often should carbon monoxide alarms and connected appliances be replaced?
• When testing a RAT (radio alarm transmitter), which type of fault must be caused between elements of the transmitting equipment?
• Fire alarm systems require how many reliable power supplies?
• Where is a detector listed for door frame mounting designed to be installed?
• A smoke detector must be marked with its nominal production ______ and tolerance. Which word completes the sentence?
• The proprietary supervising station must have at least how many qualified operators on duty at all times?
• The record of completion documentation is an example of which document type in project records?
• Within how many seconds must the secondary power supply automatically provide power to the protected premises fire alarm system when the primary power fails to provide the minimum voltage?
• Which NFPA standard covers the installation of sprinkler systems?
• In buildings that utilize duct detectors and a fire alarm system, the fire alarm system must monitor which component?
• Who is responsible for approving plans, specifications, and standards for a fire alarm system?
• Which of the following statements about NFPA 72 is true?
• For new systems or additions, which documents constitute the minimum documentation?
• What term is used to describe temporary loss of fire alarm system function requiring notice?
• Which entity is responsible for providing the test plan documentation in a fire alarm system installation?
• What is the maximum width allowed for a group doorway?
• What type of detector coverage will allow spacing requirements for detectors to be waived?
• Which standard governs the UPS within SEPSS?
• On a smooth ceiling with a listed spacing of 50′, what is the maximum distance the detector can be from any point?
• In spacing guidelines for smoke detectors on a flat ceiling, what distance should be used as the guide?
• What is the minimum number of times the board must meet each year, according to the governing rules?
• Which statement best describes the primary safety focus of carbon monoxide detection in NFPA 72?
• What is the detector time constant for a 135° heat detector that has a listed spacing of 50′?
• Which device always generates a supervisory signal at the FACP?
• For software-based systems, which party should receive a copy of the site-specific software?
• What is the function of the secondary power supply in a fire alarm system?
• Which chapter is designed to stand alone unless it specifically refers to an earlier chapter?
• A NAC extender in a protected premise fire alarm system is required to work normally at which humidity and temperature?
• Who is responsible for reviewing electronic documentation media formats and associated interfacing hardware for compatibility and updating if necessary?
• What should be provided with the record drawings?
• In special environments, visual notification appliances must be what?
• Which NFPA 72 section addresses initiating devices sub general requirements?
• Which NFPA 72 subsection addresses heat detection design documentation?
• The secondary power supply capacity required shall include all power supply loads that are not automatically disconnected upon transfer to the secondary power supply.
• After the next test date, the retention period lasts for how long?
• What is the maximum distance between the highest switch, lamp, or textual display and the finished floor?
• Public fire alarm system wireless street boxes are self-powered and required to operate for at least how long?
• Which of the following can serve as an AHJ on a construction project?
• A Protected Premises System operating under secondary power must be capable of _______.
• What is the maximum width for a group doorway?
• Which NFPA standard is commonly referenced for sprinkler system installation?
• What is the color code for a heat detector rated at 250°F?
• Under NFPA 72, which subsection addresses secondary power supply for household fire alarm systems?
• The acronym ANSI stands for which organization?
• What type of smoke detector would work best in areas with higher temperature, higher air velocity, or humid conditions?
• According to NFPA 72, which statement is true regarding zoning?
• NFPA 72 covers which of the following statements?
• All metallic conductors must be tested with a meter to verify stray voltages between the conductors and ground that exceed how many volt(s) ac/dc?
• Who shall be notified when an impairment period ends?
• What is the minimum flash rate for visible notification appliances?
• A coded supervisory signal must consist of not less than how many rounds of the number transmitted for supervision and how many for restoration to normal?
• When should abandoned fire alarm equipment be removed?
• What is the purpose of retroactivity in NFPA 72?
• For how long should testing sub records be retained following the next test date?
• Which of the following is an example of a supervisory signal initiating device?
• Which device is associated with a supervisory signal in a dry-type system?
• What is the stated purpose of the quality of installation established by NFPA 72?
• Which documents should be provided for all initiating devices, notification appliances, remote indicators, annunciators, remote test stations, and end-of-line and power supervisory devices?
• For software-based systems, what must be provided to the system owner?
• Which temperature is outside the FACP operating range of 32°F to 120°F?
• Access to wall-mounted telephone appliances must be at least how wide?
• A smoke detector must be marked with its nominal production ______ and tolerance.
• Who can review plans and specifications?
• When testing a RAT (Radio Alarm Transmitter) transmitter, a ______ between elements of the transmitting equipment shall be caused.
• Which statement about power supplies for public emergency alarm reporting systems is true?
• What is the correct spacing of a heat detector listed for 25 feet and a ceiling height of 25 feet?
• Which of the following would not be a characteristic of a Class A circuit?
• What is the minimum mounting height for an audible notification appliance?
• If a relay is used to initiate control of fire safety functions and it is connected to a fire alarm system, it must be within what distance of the control circuit or appliance it is controlling?
• If a heat detector with a listed spacing of 50 ft is mounted on an 18 ft 1 in. high ceiling, what is the maximum allowable spacing?
• What is the minimum capacity requirement for the secondary power supply for the protected premises system under quiescent load?
• Who shall be notified when a system or portion thereof is impaired?
• What should be the visible annunciation of the location of an operated initiating device?
• What is the maximum distance a heat detector can be from any point on a smooth ceiling given a listed spacing of 50′?
• Power transfer for protected premises must occur within how many seconds?
• Records of testing shall be retained until the next test date and for how long thereafter?
• What item must be included in the record of completion documentation?
• When the runner is not in attendance at the proprietary supervising station, the runner will establish two-way communications with the station at intervals not...
• Which device has a quarterly test frequency?
• In the context of testing documentation, the retention period after the next test date is for what duration?
• What is the maximum number of waterflow switches that may be connected to a single initiating device circuit?
• Where should heat detectors be mounted on beam ceilings when the specified beam dimensions apply?
• Which document is the standard for portable fire extinguishers?
• Which statement best describes the role of visible annunciation in a fire alarm system?
• Visible notification appliances must not have a candela rating less than ____ when installed in a corridor.
• When duct detectors are present, which detectors must be monitored by the fire alarm system?
• Which detector coverage allows spacing requirements to be waived?
• Who is responsible for providing the record of completion?
• What is permitted regarding emergency communication systems and fire alarm system record documentation according to the text?
• How long should fuel be available for testing and emergency use in generators for public emergency alarm reporting systems?
• The National Fire Alarm and Signaling Code is also known as which standard?
• According to NFPA 72, a household fire alarm system is required which of the following regarding smoke detection circuits?
• Manual fire alarm boxes must be located within how many feet of an exit door?
• When installing ember detectors, which factor is not a required spacing consideration?
• A coded alarm requires not less than three complete rounds of the transmitted number. Each round not less than how many impulses?
• In buildings that use both duct detectors and a fire alarm system, which device must the fire alarm system monitor?
• According to NFPA 72, a separate storage battery and automatic charger should be provided for which purpose?
• Spacing for spot type smoke detectors can be up to how many feet on a smooth ceiling (in the absence of specific performance based design criteria)?
• Electronic media shall not be permitted as a medium for retaining inspection records.
• What term is used in NFPA 72 to describe temporary loss of system function requiring notification?
• Which action requires re-acceptance testing after changes to a fire alarm system?
• Which of the following require re-acceptance testing to be performed?
• Retransmission of signals for a remote station system can be accomplished by which of the following means?
• Which of the following is NOT a requirement for a system arranged to stop or reduce ambient noise?
• Protective covers for notification appliances must be?
• Not retaining testing records could expose the facility to which risk?
• What is the maximum number of supervised smoke alarms that can be interconnected on a residential fire alarm system?
• What are the secondary power supply requirements for a household system?
• The 0.6% per foot obscuration specification for detector sensitivity relates to which aspect of detector performance?
• Who determines security for the system's documentation?
• If you need to place smoke detectors in a room that is 40′ long by 15′ wide and has a smooth ceiling, what is the minimum number of detectors required?
• During a primary power failure, what is the maximum allowed delay for alarm signals?
• Which description best describes the duration requirement for testing records after the upcoming test date?
• When door release equipment is required and the header from the top of the door to the ceiling is 28 inches on both sides, how many ceiling mounted smoke detectors are required?
• Who is responsible for providing test plan documentation?
• NFPA 72 covers which of the following areas for fire alarm systems?
• Which standard governs the retention of testing records for fire alarm systems?
• What is the maximum time allowed for the system to annunciate a failure?
• Which statement best describes NFPA 72's scope?
• Who should verify that components and functions are installed and operate per the approved plans?
• Which standard must smoke alarms and detectors comply with to operate in normal environmental conditions?
• Detector placement in high rack storage areas should be located at which locations?
• In the heat detector spacing example, what ceiling height is used?
• A coded supervisory signal must consist of not less than how many rounds of the transmitted number for fault indication?
• Which type of detectors shall you follow the manufacturers' published instructions for appropriate alarm point and spacing?
• What is the maximum air changes per hour that could require a reduction in smoke detector spacing?
• Complete records of all signals received shall be kept for at least ______ year(s).
• Manual fire alarm boxes must be located within how many feet of an exit door?
• In cold weather, a fire alarm sprinkler water storage container must be monitored to indicate when the water temperature drops below what level?
• Detector locations for high rack storage area must be located where?
• Which of the following can be considered as a supervisory signal initiating device?
• The proprietary supervising station shall have at least how many qualified operators on duty at all times?
• In buildings that contain a suppression system and a fire alarm system, the fire alarm system must monitor which of the following?
• What is the primary purpose of maintaining hard copy records of inspections and testing?
• Which type of condition shall be annunciated separately for the purpose of alarm annunciation?
• Which of the following is a valid method for initiating a manual fire alarm?
• Who verifies that all components and functions are installed and operate per the approved plans and sequence of operation?
• The retention period for testing records applies after the next test date is completed.
• What is the detector time constant for a 135° heat detector with a listed spacing of 50 ft?
• Which documentation should be provided for new emergency communications systems?
• As-built drawings are commonly referred to as which type of drawings?
• Which NFPA chapter is designed to stand alone unless it refers to an earlier chapter?
• When installing smoke detectors in rooms with HVAC diffusers, how far away are the detectors required to be from the venting?
• What is the minimum documentation required for new systems and additions or alterations to existing systems?
• Which detector type is explicitly required to follow the manufacturer's published instructions for appropriate alarm point and spacing?
• Which term describes an initiating device that cannot be restored after actuation?
• Which of the following is not permitted for supervising station alarm systems?
• What are the detector location requirements for protecting a high rack storage area?
• Trouble signal restoration timing is 200 seconds. Which of the following statements is true about the time frame?
• In NFPA 72, regarding household fire alarm systems, which statement is true?
• Manual alarm boxes must be located within 5 feet of an exit door. Which option correctly reflects this requirement?
• In the event of power failure, how many hours of backup power should public emergency alarm reporting system boxes provide?
• For combination detectors where sparks could occur in an area not on the optical axis, what adjustment is required?
• When installing a protective premise fire alarm system, which of the following may comprise the secondary power source?
• Engine-driven generators used for secondary power should comply with NFPA 70 Article 700.
• What action should be taken when carbon monoxide alarms reach the end-of-life signal?
• What should be the result of operating a means for deactivating double notification appliances?
• Which NFPA 72 section covers audible notification appliances sub location?
• Who is responsible for administering and enforcing NFPA 101, 2021 edition?
• During initial and re-acceptance testing of wireless protection systems, what should be confirmed?
• After each test or alarm, what should be done to any apparatus requiring rewinding or resetting to maintain normal operation?
• In an area with a peaked ceiling, heat detectors must be located within how many feet of the peak?
• Which statement about impairment documentation is true?
• A fire alarm system using automatic fire detection or water flow detection devices must be equipped with_______ .
• Which NFPA 72 section addresses test plan documentation responsibilities for the installer?
• If primary power fails on a fire alarm system, which of the following is required?
• Which documents should be provided for all initiating devices, notification appliances, remote indicators, annunciators, remote test stations, and end-of-line and power supervisory devices?
• Some smoke detectors have a field adjustment of sensitivity and they are required to have an adjustment range not less than what?
• Which condition is not required to be met in order to utilize speakers from an emergency voice/alarm communications system for a non-fire use?
• When are automatic smoke detectors required to be placed above fire alarm control equipment?
• Which regulation specifies the minimum documentation required for new systems and alterations to existing fire alarm systems?
• Manual alarms can be initiated by which of the following devices?
• Which standard is commonly cited for fire alarm testing recordkeeping requirements?
• Who can request a hard copy record of inspections, testing, and maintenance?
• Who should develop plans and specifications for a fire alarm system?
• The retention rule after the next test date requires retention for how long?
• In NFPA 72 terminology, what term refers to the placement reference for a smoke detector?
• Which organization publishes NFPA standards relevant to fire alarm and sprinkler system design?
• All metallic conductors must be tested with a meter to verify that there are no stray voltages between the conductors and ground that exceed how many volt(s) ac/dc?
• Residential fire alarm systems must have a backup battery capable of _______.
• What is the color code for a heat detector rated at 250°F?
• A sprinkler waterflow device must initiate an alarm signal at the control unit within how many seconds of water flow?
• What is the requirement for visual notification appliances used in special environments?
• What is the maximum time allowed between the activation of an initiating device in alarm condition and the time the alarm condition is displayed and recorded at the supervising station?
• Which of the following is not a requirement for storage batteries?
• How often must a remote annunciator be visually inspected?
• According to NFPA 72, the ANSI evacuation signal must be synchronized within a notification zone.